KMotion_dotNet Documentation
KMotion_dotNet
BOARD_TYPE Enumeration
CANON_AXIS Enumeration
CANON_DIRECTION Enumeration
CANON_FEED_REFERENCE Enumeration
CANON_MOTION_MODE Enumeration
CANON_PLANE Enumeration
CANON_SIDE Enumeration
CANON_SPEED_FEED_MODE Enumeration
CANON_UNITS Enumeration
DISTANCE_MODE Enumeration
DM_Compiler_Exception Class
DM_Disconnected_Exception Class
DM_Firmware_Exception Class
DM_USB_Exception Class
DMException Class
HexEncoding Class
HOMING_DIRECTION Enumeration
HOMING_ROUTINE_SOURCE_TYPE Enumeration
HOMING_STATE Enumeration
HOMING_TYPE Enumeration
IO_TYPE Enumeration
KM_Axis Class
KM_Axis.KM_Axis_HomingParams Class
KM_Axis.KM_Axis_TuningParams Class
KM_AxisGroup Class
KM_Controller Class
KM_CoordMotion Class
KM_CoordMotionArcFeedHandler Delegate
KM_CoordMotionArcFeedSixAxisHandler Delegate
KM_CoordMotionStraightFeedHandler Delegate
KM_CoordMotionStraightFeedSixAxisHandler Delegate
KM_CoordMotionStraightTraverseHandler Delegate
KM_CoordMotionStraightTraverseSixAxisHandler Delegate
KM_Interpreter Class
KM_Interpreter.KM_GCodeInterpreterCompleteHandler Delegate
KM_Interpreter.KM_GCodeInterpreterStatusHandler Delegate
KM_Interpreter.KM_GCodeInterpreterUserCallbackHandler Delegate
KM_Interpreter.KM_GCodeInterpreterUserMcodeCallbackHandler Delegate
KM_Interpreter.KM_Interpreter_SetupParams Class
KM_IO Class
KM_MainStatus Structure
KM_MainStatusRaw Structure
KM_MotionParams Class
KMConsoleHandler Delegate
KMErrorHandler Delegate
KMOTION_CHECK_READY Enumeration
KMOTION_TOKEN Enumeration
MCODE_TYPE Enumeration
PREV_STOP_TYPE Enumeration
RETRACT_MODE Enumeration
StatusConsts Class
TraverseCompletedHandler Delegate
Click or drag to resize

CANON_FEED_REFERENCE Enumeration

Feed reference
Remarks
The meaning of feed rate changes depending on the feed reference mode

Namespace: KMotion_dotNet
Assembly: KMotion_dotNet (in KMotion_dotNet.dll) Version: 1.0.1.0 (1.0.1.0)
Syntax
Copy
public enum CANON_FEED_REFERENCE
Members
Member nameValueDescription
CANON_WORKPIECE1 Workpiece Relative
Remarks
Feed rate is from the point of view of the workpiece
CANON_XYZ2 XYZ Relative
Remarks
Feedrate is in terms of axis motion

Some (perhaps most or all) existing dialects of RS274 use only the CANON_XYZ mode

See Also