| | Name | Description |
|---|
 | A_AxisOffset |
A Axis Offset
|
| A_AxisPosition |
Current A Axis Positon
|
| A_OriginOffset |
A axis Origin Offset
|
| Active_GCodes |
All currently active G codes
|
| Active_MCodes |
All currently active M codes
|
| Active_Settings |
Need clarification
|
| AllowSpindleSpeedOverride |
Gets/sets whether to allow spindle feed override
|
| B_AxisOffset |
B Axis Offset
|
| B_AxisPosition |
Current B Axis Positon
|
| B_OriginOffset |
B axis Origin Offset
|
| block_d_flag |
Gets d flag (d word present) in current GCode Block
|
| block_d_number |
Gets d number (d word) in current GCode Block
|
| block_p_flag |
Gets p flag (p word present) in current GCode Block
|
| block_p_number |
Gets p number (p word) in current GCode Block
|
| block_q_flag |
Gets q flag (q word present) in current GCode Block
|
| block_q_number |
Gets q number (q word) in current GCode Block
|
| block_r_flag |
Gets r flag (r word present) in current GCode Block
|
| block_r_number |
Gets r number (r word) in current GCode Block
|
| BlockDelete |
Enable/Disable Block Delete
|
| C_AxisOffset |
C Axis Offset
|
| C_AxisPosition |
Current C Axis Positon
|
| C_OriginOffset |
C axis Origin Offset
|
| ControlMode |
Cannon Control Mode
CANON_EXACT_STOP = 1,
CANON_EXACT_PATH = 2,
CANON_CONTINUOUS = 3
|
| CurrentLine |
Current line number of the file being interpreted
|
| CurrentMotionMode |
Current G code for motion
|
| CurrentToolSlot |
Tool Changer slot number of current tool
|
| Cycle_CC |
Gets/sets canned Cycle C value
|
| Cycle_I |
Gets/sets canned Cycle I value
|
| Cycle_J |
Gets/sets canned Cycle J value
|
| Cycle_K |
Gets/sets canned Cycle K value
|
| Cycle_L |
Gets/sets canned Cycle L value
|
| Cycle_P |
Gets/sets canned Cycle P value
|
| Cycle_Q |
Gets/sets canned Cycle Q value
|
| Cycle_R |
Gets/sets canned Cycle R value
|
| Cycle_RetractMode |
Gets/sets canned Retract Mode
R_PLANE = 0,
OLD_Z = 1
|
| Cycle_Z |
Gets/sets canned Cycle Z value
|
| DistanceMode |
Unit distance mode
MODE_ABSOLUTE = 0,
MODE_INCREMENTAL = 1
|
| FeedMode |
G_93 (inverse time) or G_94 units/min
|
| FeedRate |
Current FeedRate
|
| FileName |
Current File name being interpreted
|
| FloodCoolantOn |
Flood Coolant State from Interpreter
|
| LengthUnits |
Canon Length Units
CANON_UNITS_INCHES = 1,
CANON_UNITS_MM = 2,
CANON_UNITS_CM = 3
|
| LineLength |
Character length of the current line
|
| LineText |
Text of the currently interpreted line
|
| MistCoolantOn |
Gets and sets whether Mist Coolant is on
|
| OriginIndex |
Origin Index
G54, 55, etc...
|
| PercentFlag |
Flags true if the file had a percentage sign
|
| ProbeComplete |
Gets and sets whether a probe operation is complete
|
| ProgramX |
Program's X position
|
| ProgramY |
Program's Y position
|
| RadiusComp |
Radius compensation mode
|
| RadiusCompSide |
Radius compensation side
CANON_SIDE_RIGHT = 1,
CANON_SIDE_LEFT = 2,
CANON_SIDE_OFF = 3
|
| RadiusCompValue |
Radius compensation value
|
| SelectedToolSlot |
Tool slot selected but not active
|
| SequenceNumber |
Current sequence of the file being interpreted
|
| SpindleDirection |
Spindle rotation direction
CANON_STOPPED = 1,
CANON_CLOCKWISE = 2,
CANON_COUNTERCLOCKWISE = 3
|
| SpindleSpeed |
Current Spindle Speed
|
| ToolLengthOffset |
Current tool length offset
|
| ToolLengthOffsetIndex |
Row in tool table for current Length Offset
|
| ToolXOffset |
Current tool X offset
|
| ToolYOffset |
Current tool Y offset
|
| TraverseSpeed |
Spped to use during G00 traverse operations
|
| WorkPlane |
Canon Work Plane
CANON_PLANE_XY = 1,
CANON_PLANE_YZ = 2,
CANON_PLANE_XZ = 3
|
| X_AxisOffset |
X Axis Offset
|
| X_AxisPosition |
Current X Axis Positon
|
| X_OriginOffset |
X axis Origin Offset
|
| Y_AxisOffset |
Y Axis Offset
|
| Y_AxisPosition |
Current Y Axis Positon
|
| Y_OriginOffset |
Y axis Origin Offset
|
| Z_AxisOffset |
Z Axis Offset
|
| Z_AxisPosition |
Current Z Axis Positon
|
| Z_OriginOffset |
Z axis Origin Offset
|
Properties