View source for Known KMotionCNC CAD/CAM Post Processors

==<span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">Mechsoft</span>==
<div class="yiv354472887MsoNormal">http://mecsoft.com/freemill/</div>
<div class="yiv354472887MsoNormal"></div>
<div class="yiv354472887MsoNormal"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">Hi Tom,</span></div>
<div class="yiv354472887MsoNormal"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">  </span></div>
<div class="yiv354472887MsoNormal"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;"> After much digging, I did find a post processor file in the Freemill site and it seems to work!  </span></div>
<div class="yiv354472887MsoNormal" style="text-indent: .5in;"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">  </span></div>
<div class="yiv354472887MsoNormal" style="text-indent: .5in;"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">Just an FYI:</span></div>
<div class="yiv354472887MsoNormal" style="text-indent: .5in;"><span style="color: #000000;"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif';">The </span>(freemill) instructions installing it were not accurate so if you run into this in the future the processor is downloaded at :</span></div>
<div class="yiv354472887MsoNormal" style="text-indent: .5in;"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">[http://mecsoft.com/PostProcessors/MILL/kmotion.spm http://mecsoft.com/PostProcessors/MILL/kmotion.spm]</span></div>
<div class="yiv354472887MsoNormal" style="text-indent: .5in;"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">  </span></div>
<div class="yiv354472887MsoNormal" style="text-indent: .5in;"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">And then the file is installed into</span></div>
<div class="yiv354472887MsoNormal" style="text-indent: .5in;"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">C:\ProgramData\MecSoft Corporation\VisualCAM 2014\Posts\MILL</span></div>
<div class="yiv354472887MsoNormal"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">  </span></div>
<div class="yiv354472887MsoNormal"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">Thanks for your rapid reply!</span></div>
<div class="yiv354472887MsoNormal"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">  </span></div>
<div class="yiv354472887MsoNormal"><span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">Troy</span></div>
<div class="yiv354472887MsoNormal"></div>
==<span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">AutoDesk Fusion 360</span>==
<div class="yiv354472887MsoNormal"></div>
See this post

https://forums.autodesk.com/t5/fusion-360-computer-aided/tool-parameters/td-p/5711808


Also this post

http://www.cnczone.com/forums/dynomotion-kflop-kanalog/343726-posprocessor-fusion360-kflop.html#post2086576


'''Alexander (Александр Украинец)''' contributed two Posts.  One for Mill and one for Lathe (the .txt extension should be removed)

[[Media:Fusion_360_KFLOP_Mill.cps.txt|Fusion_360_KFLOP_Mill.cps.txt]]

[[Media:Fusion360_KFLOP_Turning.cps.txt|Fusion360_KFLOP_Turning.cps.txt]]

[[Media:Fusion360_KFLOP_Turning_Rev2.cps.txt|Fusion360_KFLOP_Turning_Rev2.cps.txt]] (Added thread cutting G32)


'''mirocha''' posted this file on [https://www.cnczone.com/forums/dynomotion-kflop-kanalog/394550-fusion-360-post-processor-post2345608.html#post2345608 cnczone]

[https://www.dynomotion.com/wiki/index.php?action=ajax&title=-&rs=SecureFileStore::getFile&f=/7/73/KmotionCNC_fusion_post_processor.pdf KMotionCNC Fusion Post Processor]

Post Processor for Fusion 360, I built a DIY 3 axia router, built to mill aluminum, 40 mm anti backlash ball screws, 3 hp spindle, stout machine. My programing computer hard drive crashed, new hard drive and reloaded Fusion 360 took hours to find the post processor file I was using and has worked for a few years with no problems. Below is the post processor for fusion 360 that I use. In my case I zero the XYZ to the piece, I do not have a tool changer, when I create the g code in Fusion 360 I create the g code for each tool separately, run the program, manually change the tool and run the next program for the next tool. This has worked great for me.

If your a DIY and need a post processor for fusion 360 this one works for Kflop/Kmotion, What I did was made a copy of one of the fusion 360 stock .cps files that are in fusion 360, open the KmotionCNC.pdf in notepad copy what is in the pdf over the stock .cps file and renamed it KmotionCNC

==<span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">BobCAD</span>==
See Forum Thread [https://www.dynomotion.com/forum/viewtopic.php?f=10&t=1230 here].

==<span style="font-size: 11pt; font-family: 'Calibri','sans-serif'; color: #000000;">Dolphin CAD/CAM</span>==
See Forum Thread [https://www.dynomotion.com/forum/viewtopic.php?f=10&t=1743#p7413 here].