Cyclic USB connection

Moderators: TomKerekes, dynomotion

Post Reply
zaxtone
Posts: 1
Joined: Fri Aug 03, 2018 12:46 pm

Cyclic USB connection

Post by zaxtone » Mon Aug 06, 2018 2:46 pm

Hello. Burned chip U6 SPARTANXC3S100E, also burned U10 FTDI FT245RL.
I replaced it with new ones.
Made the FTDI firmware as specified
Now the computer sees KFLOP but in the program it tries to connect cyclically
Attachments
KMOTION KONNECT.gif
KMOTION KONNECT.gif (423.61 KiB) Viewed 1441 times
Top
User avatar
TomKerekes
Posts: 2677
Joined: Mon Dec 04, 2017 1:49 am

Re: Cyclic USB connection

Post by TomKerekes » Mon Aug 06, 2018 5:25 pm

Hi zaxtone,

Have you tried performing Flash Recovery?
Regards,

Tom Kerekes
Dynomotion, Inc.
Top
Post Reply

Return to “Hardware Interface Issues”