I see the G43 command is added in the latest version 5.4.3. That was fast! Thank you Tom!
I'll get my machine updated as soon as I'm done running the job I'm currently using it for. Also, I regret leaving the toolsetter sitting in a box for so long before getting around to implementing it. This thing is great, and a huge time saver.
Toolsetter program
Moderators: TomKerekes, dynomotion
-
TomKerekes
- Posts: 2948
- Joined: Mon Dec 04, 2017 1:49 am
Re: Toolsetter program
Video of toolsetter in use. The machine is a bit of a mess, I'm in the middle of a job that got put aside for today.
https://drive.google.com/file/d/1nJ8lGB ... sp=sharing
Video of screen while using toolsetter.
https://drive.google.com/file/d/1lwhlL9 ... sp=sharing
I can post these somewhere else if you have a suggestion. The video makes my Z axis sound terrible... that's just noise from the belt coupling the motor to the ballscrew and it goes away after a couple minutes of running.
I have a job coming up where I'll probably be peck tapping some stainless, maybe I can get a video of that too.
https://drive.google.com/file/d/1nJ8lGB ... sp=sharing
Video of screen while using toolsetter.
https://drive.google.com/file/d/1lwhlL9 ... sp=sharing
I can post these somewhere else if you have a suggestion. The video makes my Z axis sound terrible... that's just noise from the belt coupling the motor to the ballscrew and it goes away after a couple minutes of running.
I have a job coming up where I'll probably be peck tapping some stainless, maybe I can get a video of that too.