DRO Lable for positions of U and V axis.

[AmitKumar171]

Hi Tom,

I am using Kflop Board and I want to display the U value and V value on my DRO similar to the of X, Y, Z, A, B, C axes.

Here is the attached image

Screenshot (105).png (4.93 KiB) Viewed 6480 times

.

Is it possible to make U DRO Similar to above axis so it shows Machine coordinates/Fixtures/Simulation mode/ Encoder mode also. ?

If Yes the please guide me how to do that.

Waiting for your kind reply.

[TomKerekes]

Hi Amit,

Its not common to need more than 6 axes. When there are more than 6 axes they are usually something like an Extruder that wouldn't need a DRO.

It would take a fair amount of work to expand KMotionCNC to fully 8 axes. It would involve the DROs, Transforms, Expanding Screens, Jog Buttons, Jog Speeds, Offset Tables, Zero/Set Buttons, etc...

The KMotionCNC Source Code is all available to you if you would like to add that functionality yourself.

Or basic DRO capability can be added with the Screen Editor.

If this appears to be useful to other Users we will consider adding it in the future. Thanks for the feedback.

Regards

[AmitKumar171]

Hi Tom,

Thanks for the reply.

[Rasta]

Hi;
I, would also like to be able to name my wire Edm, axis labels X, Y, Z ,U, V, C, these are the standard designation for wire edm machines, and their
programs and cam posts,
Please let us know when Dynomotion or any other user do any work on this
Regards
Mariano