Hello,
Is it possible to limit the g code text editor built in KmotionCNC to enable for only visualization? Or maybe prevent editing unless some password is informed.
Sincerely,
Guilherme
Limit G code editor to visualization only
Moderators: TomKerekes, dynomotion
-
gui_marchioro
- Posts: 59
- Joined: Sun Aug 21, 2022 11:22 pm
-
TomKerekes
- Posts: 2676
- Joined: Mon Dec 04, 2017 1:49 am
Re: Limit G code editor to visualization only
Hi Guilherme,
Right clicking in the GCode Editor has an option for making the Editor Read Only. However on the next start of KMotionCNC it will be Writeable again. See here.
The Screen Editor can be used to set the Var parameter for the GCode Editor to either:
0 = Initially Read Only but changeable by the context menu
1 = Initially Writeable but changeable by the context menu
2 = Read Only and unchangeable
Right clicking in the GCode Editor has an option for making the Editor Read Only. However on the next start of KMotionCNC it will be Writeable again. See here.
The Screen Editor can be used to set the Var parameter for the GCode Editor to either:
0 = Initially Read Only but changeable by the context menu
1 = Initially Writeable but changeable by the context menu
2 = Read Only and unchangeable
Regards,
Tom Kerekes
Dynomotion, Inc.
Tom Kerekes
Dynomotion, Inc.