Voltages required for KANALOG interface?

[RogerFroud]

I can see that 12V is shown as being supplied to the KFLOP power connector, with a note that it's not required but routed to JP7.

However, I can't find anywhere in the KANALOG reference material as to whether 12V is required for the board to function. I don't plan on using a PC power supply, I've already got a +5V PSU that I'm going to use, and I don't need 12V for anything else.

So the question is...

Does KANALOG work on 5V alone, or does it require the 12V from the KFLOP board to function?

[TomKerekes]

Its not required for any of our boards.

[RogerFroud]

Thanks for making that clear.