I would like to add a Pendant/Encoder Knob to my vb.net/KFlop applications. I'd like to get the most real-time control possible for jogging and axis from the wheel. I suspect that reading the knob via custom hardware->USB->vb.net than sending commands to the KFlop is *not* going to get me anywhere near time control. This leads me to believe that I would need a KFlop C program running in one of the available threads to read some KFlop IO pins and then send the appropriate movement to the KFlop. The encoder knob has connections for A and B (as well ad Vcc and Gnd).
Assuming this is the best method for what I'm attempting to do, any example code or specific docs available for doing this?
Homemade Pendant Encoder control....
Moderators: TomKerekes, dynomotion
- TomKerekes
- Posts: 2677
- Joined: Mon Dec 04, 2017 1:49 am
Re: Homemade Pendant Encoder control....
Regards,
Tom Kerekes
Dynomotion, Inc.
Tom Kerekes
Dynomotion, Inc.
-
- Posts: 85
- Joined: Fri Apr 27, 2018 12:44 pm
Re: Homemade Pendant Encoder control....
Thank you for the link, Tom.