Dynomotion Forum

Hi, I recently bought a Kstep and Kflop (the second set I have)
and after the assemble I realize the cable that connect the kstep and the kflop is too short
I don't know if the cable is short or the stand up is bigger, Attached are the images with the measures I took
Don't get me wrong, I'm just writing this as a feedback, so this don't happen to someone else, I'm not disappointed with the product
I solved with another cable I have.

regards
German

Hi German,

Thanks so much for pointing that out. We normally include 1.25 inch (31.75mm) standoffs.

It looks like the cable would be tight even with those.

Regards