KMotion/KFLOP/Kogna Version 5.3.5 Released
Posted: Mon Sep 16, 2024 11:25 pm
KMotion/KFLOP/Kogna Version 5.3.5 Released
(Note the new mm mode added in Version 5.3.4 on the KMotionCNC | Tool Setup | Trajectory Planner Screen is incorrect, please use Inch mode until fixed in the next Version)
KMotionCNC - Expand GUI to support U and V axes for a total of 8 axes. New DRO and Jog buttons for U and V.
Example 8 axes Screen 8 Axes.scr with UV axes DROs and Jog Buttons
UV Fixture Offsets
UV Jog Speeds
Optional KMotionCNC Tool Setup Password Protection
A number of other fixes and features.
Please report any issues.
Complete Change List V5.3.5
Download
(Note the new mm mode added in Version 5.3.4 on the KMotionCNC | Tool Setup | Trajectory Planner Screen is incorrect, please use Inch mode until fixed in the next Version)
KMotionCNC - Expand GUI to support U and V axes for a total of 8 axes. New DRO and Jog buttons for U and V.
Example 8 axes Screen 8 Axes.scr with UV axes DROs and Jog Buttons
UV Fixture Offsets
UV Jog Speeds
Optional KMotionCNC Tool Setup Password Protection
A number of other fixes and features.
Please report any issues.
Complete Change List V5.3.5
Download