Modernization of the lathe machine Schaublin 102 cnc
After cleaning
Re: Schaublin 102 cnc
Posted: Fri Jan 18, 2019 7:06 pm
by Musienko_D
First test
Re: Schaublin 102 cnc
Posted: Fri Jan 18, 2019 7:15 pm
by Musienko_D
The spindle can work as a rotary axis, the mode will switch according to the M command.
It remains to replace or add the encoder on the spindle, the resolution is too low.
Re: Schaublin 102 cnc
Posted: Sun Jan 20, 2019 7:18 pm
by TomKerekes
Nice work. Thanks for sharing. I like your simple Screen.
Nice work. Thanks for sharing. I like your simple Screen.
Thank.
The machine is controlled by external buttons, on the monitor only the display of the necessary information.
Now added VertBar, but not enough horizontal bar scale.