Gcode issue in trajectory planner

[dominfo]

Hello Tom

I have a Gcode which is triggering an error from KMotion, just after being started by my .Net app:
=> Invalid buffer times in Trajectory Planner

The program is inspired from polygon.ngc (a topic we discussed before)

what could be the reason of this error ?

Regards
Frederic

**** Edit ****

I'm using the x64 version


**************

[TomKerekes]

Hi Frederic,

It runs ok in KMotionCNC Debug 64-bit. Does other GCode run ok from your App? You might set KMotionCNC's Trajectory Planner values to the same as your .NET App to see if it has a problem.

[dominfo]

Hello Tom
I confirm that it works with KMotionCNC 64 bits with same trajectory planner settings, same with the GCode interface of KMotion in 64 bits.
Is it something related to the Kmotion_dotnet 64 bits ?

When compiling my .net app towards the Kmotion_dotnet dll in 32 bits, I don't have the issue.

Regards,
Frederic

[TomKerekes]

Does other GCode run ok from your App?

[dominfo]

Hello Tom

Sorry for late replies.
Yes other Gcode runs with the 64 bit version if not using a programming style like "polygon.ngc" ie the O103 subprogram on my example.


Regards
Frederic

[TomKerekes]

Hi Frederic,

I can't duplicate the problem. It runs oK in the 64-bit Release code of the Version 5.3.0 Dynomotion VB .NET example.