Dynomotion Forum

Hi Tom Does Kstep work to interface kflop and servo drives? Does it have differential drivers and receivers for quadrature encoders? Or just is for stepper drivers? Rigth now i am using a 3rd party line differential driver and receiver but if kstep work would be better also it includes spindle speed...

Hi Tom. Hi Noel, Yes incremental mode. I see it accepts A/B quadrature commands. That would be preferable over Step/Direction. To connect to single ended inputs connect just one signal and leave the other unconnected. Never ground an output. Note single ended signals are more noise sensitive than di...

Hi Tom Hi Noel, Yes incremental mode. I see it accepts A/B quadrature commands. That would be preferable over Step/Direction. To connect to single ended inputs connect just one signal and leave the other unconnected. Never ground an output. Note single ended signals are more noise sensitive than dif...

Thank you Tom.

is there some way to save all history in a folder or file, where i can see the functions record from days or weeks? console clears when turn kflop off right?

Hi Tom I see the MCodes are set to "Execute Prog". In this case the GCode doesn't wait for the C Program to finish before going on. The danger would be that another C Program to use the same Thread Kills the Thread and downloads the next program to the Thread before the first C Program finishes. Pro...

I have tested the external contactors and and valves, they work ok. also i teach the operator to open the digital IO screen and see if the respective bits are on, but he say they doesn't turn on when that happen. console doesn't show any errors, i recently updated the last version 5.3.1 but it did i...

Hi Tom. thank you for the previous answers you gave me, programs works perfect now. I have an other issue with the cnc router that has been working almost two years with kflop and kannalog, most of the time it works perfect, but sometimes it skip C program functions, for example it uses 4 independen...

one more question regarding to parameters, i am making some voice WAV. messages to better explain the operator when something is wrong. I im trying to use a C program with parameters and use only one Mxx code to call them, just like i did to activate a multisipndle boring drills in other machine, so...

Hi Tom. I am working with a cnc router retrofit, this machine is equipped with an ATC spindle and a multispindle boring head like most cabinet making machine centers, but this machine has two servo motors on Z axis, one for the atc spindle and one for the boring head, so they work independently. i a...

Hi Tom

can i add voice messages using C programs, for example, using synthetized voice messages instead box messages or use both like "low air pressure", "axis travel limit negative"
etc.

regards