Dynomotion Forum

Thank you Tom,
it's working now, i have some buttons locked up while running G code.

Yes, I have created some bitmap buttons, also i need that some buttons be disabled when running G code like jog buttons, how can do that, You would probably want to use a state machine approach in your forever loop in Thread #1 to do multiple things at the same time. also how to do this please. Than...

Hi Tom I am designing a new custom screen interface for a cnc router, i need to add some new user buttons and i would like to make them, light up or change their color when be active, like toggle button but some of em will be momentary just push and keep light on, and turn off when push other button...

Hi Tom

does kflop and konnect works with Mach 4 ?

regards

Hi Tom

What is the function of the reset pin #4 on JP7, JP6, JP4 ?

best regards

Hi Tom. I am trying to find where are the Cycle start, Stop, buttons functions, if i want to add a function or modify something. for example i wouild like the Stop button make a controllerd stop by halt first then disable the axis, also the Cycle start add the code you sent me in the previous post. ...

Hi Tom what can i do to set the home reset action as a first condition at the KmotionCNC startup, like if the machine is not homed first, the park and cycle start buttons are disabled maybe only be able to jog the axes, then after homing the axes and set to zero, enable the cycle start and park butt...

Hi Tom I think I found the problem. I was setting Z to the total distance between the spindle and machine bed, so there was no space for tool length and stock, now i entered the right distance that match every tool length plus the stock and is working ok, other issue was the run button if i do not p...

Tom
have an other question, i have read in other topic here, about tool table index, what is it? does the tool value have relation with each other or one in specific?

thanks

Hi Tom Is length compensation for that tool turned on when you do this? yes tool length compensation is turned on with G43 from Gcode, also the tool length offset/immediately in trayectory planner is checked on. What value do you enter? I tested this first. when i reset home axes, after find the upp...