Dynomotion Forum

Makes sense.

Thank you.

Thank you Tom,

Much appreciated.

Thank you Tom,

I will have a think about this, but I appreciate the information.

Would I include that c code in the initialisation c code?

Thank you Tom,

I will try this out and let you know if I have trouble.

Sorry one other thing quickly, where can I purchase a male plug for JP6 or JP4?

Thank you very much.

Thank you, Tom, So in accordance with this link below, I could use "JP33" and the pin 8 and then choose an unused pin between 9 and 24. Is that correct? How would I activate it with KMotion to set "0" in the Z-axis? What c code can be used to assist with this operation? Any assistance would be much ...

Thank you, Tom, However, I still do not know where to start. Let me explain my confusion: 1. "JP7 - GPIO" is used to connect to KStep. Therefore, should I use JP4 or JP6 pin-outs? KFlop_Pinouts.PNG 2. Where do I assign the pinouts and which c code sample could I use? See below. MPG c examples.PNG Th...

Hi all,

I require assistance with connecting the following CNC X-probe to KFlop/KStep.

http://www.3dprintingstore.co.za/cnc/cnc-z-probe/

Any assistance would be much appreciated.

Thank you.

Hi all, I want to connect a standard MPG to the KFlop, please see the wiring description/diagram in the attachment. I am using it on my 3-axis milling machine with a spindle, KStep driving the stepper motors. I am not an electronic technician/engineer, so I would require a KISS description, please!!...

Thank you, Tom.

I will review and get back to you regarding the relay wiring.

Hi Tom, Thank you for your feedback. Apologies, what do you mean the 5V and Rx are wrong, how should they be? I have the DC power connected through the relay to and then the relay to the motor controller. The spindle uses a 7.5V DC motor supply. I found further info on the relay. Please see below an...