Dynomotion Forum

hi Tom, when pressing the download link of version 5.3.6, version 5.3.5 is downloaded instead
regards
Mariano

Hi Tom , the axis is working now , I have some problems that I'm trying to fix myself, however I have discovered what appears to be a bug in the 5.3.5 version , trayectory planner If you set up for inches , and then press the units radio button in the trayectory planner to mm it will multiply the nu...

Hi Tom , I have removed A and B axis from the screen and put the U and V axis in their place , But after the initialisation, the U and V axis remain are still not implemented ( yellow numbers ) and the jogging buttons don’t work for those axis .I think that the initialisation program does not call f...

Hi Tom,
Thank you , that did the trick,
I installed the last version , and must thank you and the team for implementing the U,V axis ( I long time wish for the Wire EDM users) .Now I have to find my lost buttons
Thanks again
Mariano

[youtube][/youtube]
https://youtube.com/shorts/ZLh28uRpGVs? ... DrAL-zpz5B

Hi Tom; I turn on the computer, at this time the kflop has no power( have a toggle switch that is off when the computer is booting . when the computer finish the booting sequence, then I start Kmotion CNC , at this time the DRO shows X 0000 Y 0000, in yellow numbers, also at this time the Kflop is o...

this is the testing rig on this one the X and Y DRO reads as it should zero in machine position (red numbers) #include "KMotionDef.h" #define TMP 10 // which spare persist to use to transfer data #include "KflopToKMotionCNCFunctions.c" // Example Init program that includes "smooth" MPG motion exampl...

[code] [/code] #include "KMotionDef.h" #define TMP 10 // which spare persist to use to transfer data #include "KflopToKMotionCNCFunctions.c" // Example Init program that includes "smooth" MPG motion example // which makes use of the exponential motion command. #define QA 27 // define to which IO bi...

hi Tom; sorry for the delay , but i have been trying a couple of things like flashing the Kflop and doing a recovery , and the controller still shows the 25.4000 in X and Y DRO machine position, in fact when I start the Kmotion CNC program it reads 0.0000 in X and Y , with the Kanalog not initialise...

hi; I have the same issue , but my problem is as follows I have a machine that when I home it the machine coordinates "Red DRO display"in X,Y , instead of showing 0000, it shows 25.4..and I cant change it or reset it. now I have set up a controller running another kflop/ Kanalog board , but with sam...