Dynomotion Forum

Hi Tom, The other day I got a feeling that I may have misunderstood, probably because english/american in not my native language. The KFlop manual says:"Maximum error limits the maximum value allowed to pass through the servo compensator" How exactly is this to be understood? Does this mean that if ...

Hi Tom, It's me, the boy that cried wolf :oops: :oops: :oops: It turned out that my KFlop is OK and my years of trouble free service had been riding on pure dumb luck. After swapping in the spare KFlop I got no boot on the spare either. I have the back plate that carries Kanalog mounted on drawer sl...

Hi Tom, The external power reads 5.05vdc measuring from disconnected connector. No it definitely is not cost effective to trouble shoot and repair. I have a spare board just for these cases since I use them in business. I will install a new board and the old goes to my tinker/lesson learned pile. I ...

Hi Tom! After years of trouble free service I started getting Autodisconnect readfail errors. First time 2 months ago. I changed the USB cable and issue went away. 2 days ago the error came back. Testing with new cable did not correct the issue. Kflop leds kept blinking and readfail kept on popping ...

Hi Tom, As allways I find your answers very helpful. After rethinking and digging deeper I noticed that all that I need is already in the c programs folder. Since you have allready done the heavy lifting I figure I'll have few minutes of ctrl-c/-v, few hours to add the abs encoder with math for XZ r...

Hi Tom, I mean this from 0:12 to 0:17 https://www.youtube.com/watch?v=QyW4-Rbju4w. I imagine doing that with cnc/G-code takes hadful of drillbits for practice, but can this be done in for loop of init file? X slaved to Z, gain from tilt, Z slaved to quill handle encoder? So basically the question is...

Hi All :D I'm currently wondering if I should convert my old Bridgeport to CNC or just replace it with something else. Major unclear is how to config for the combination of tilted milling head and quill feed. In my workshop I have a fully analog person that needs the possibility to operate in manual...