Dynomotion

Group: DynoMotion Message: 14779 From: seanwebb2001 Date: 5/17/2017
Subject: help!!!
I keep getting this error message on a simple profile.
"G code error : concave corner with cutter radius comp"
It happens on an angle cut not even on a radius.
Group: DynoMotion Message: 14780 From: tmday7 Date: 5/17/2017
Subject: Re: help!!!
Sounds like your move to turn on cutter comp is to small or being turned on in the wrong direction. Can you post your Gcode?

Troy
Group: DynoMotion Message: 14781 From: sean webb Date: 5/17/2017
Subject: Re: help!!!
I posted a picture in the albums


On Wed, May 17, 2017 at 7:24 PM, tmday88@... [DynoMotion]
<DynoMotion@yahoogroups.com> wrote:
 

Sounds like your move to turn on cutter comp is to small or being turned on in the wrong direction. Can you post your Gcode?

Troy
Group: DynoMotion Message: 14782 From: Tom Kerekes Date: 5/17/2017
Subject: Re: help!!!

You might read this topic in the wiki:

http://www.dynomotion.com/wiki/index.php?title=Internal/concave_Path_Tool_Radius_Compensation_Example_G41/G42

Regards

TK


On 5/17/2017 4:25 PM, sean webb seanwebb2001@... [DynoMotion] wrote:
 

I posted a picture in the albums


 

Sounds like your move to turn on cutter comp is to small or being turned on in the wrong direction. Can you post your Gcode?

Troy
Group: DynoMotion Message: 14783 From: sean webb Date: 5/17/2017
Subject: Re: help!!!
Okay so my arc needs to be started before out In space on that same angle .


On Wed, May 17, 2017 at 7:46 PM, Tom Kerekes tk@... [DynoMotion]
<DynoMotion@yahoogroups.com> wrote:
 

You might read this topic in the wiki:

http://www.dynomotion.com/wiki/index.php?title=Internal/concave_Path_Tool_Radius_Compensation_Example_G41/G42

Regards

TK


On 5/17/2017 4:25 PM, sean webb seanwebb2001@... [DynoMotion] wrote:
 

I posted a picture in the albums


 

Sounds like your move to turn on cutter comp is to small or being turned on in the wrong direction. Can you post your Gcode?

Troy