Is the dogleg type path the only setting on G0's, it causes a different path than my CAM shows and has caused a few close calls with clamping.
Todd
Group: DynoMotion
Message: 1459
From: Tom Kerekes
Date: 7/8/2011
Subject: Re: G0's
Hi Todd,
Yes that is currently the only option. Rapids (G0) move all the axes independently at their max allowed Velocity, Acceleration, and Jerk using a 3rd order motion profile which can be substantially faster and smoother than 2nd order coordinated motion. But yes that will likely not result in a straight line. You might consider changing them to G1 commands with a high feedrate.
Regards
TK
--- On Fri, 7/8/11, morgtod <todmorg@...> wrote:
From: morgtod <todmorg@...> Subject: [DynoMotion] G0's To: DynoMotion@yahoogroups.com Date: Friday, July 8, 2011, 8:41 AM
Is the dogleg type path the only setting on G0's, it causes a different path than my CAM shows and has caused a few close calls with clamping. Todd
