Changes KFLOP and KMotion Released Versions 4.29 -> 4.30z  7/03/2012





KFLOP

-----



- FPGA, FPGAW New Console Commands allows PC to write directly to FPGA  



- Fix Backlash Compensation issue with Slaved axis



- Added Global ResolverFactor to allow other resolutions than 1000 counts/cycle



 



KMotion

-------





KMotionDLL

----------





KMotionCNC/CoordMotion/GCode Interpreter

----------------------------------------



- Allow assigning GCode File to a User Button by *.ngc file extension



- Avoid USB Starvation when Continuously zooming GCode Viewer on large files



- Fix erroneous placement of Simulate Control after certain re-sizing of screen



- Execute/Halt toolbar buttons replaced with larger Cycle Start/Halt button which

  can also be triggered with F5 (or spacebar if currently selected)  

  

- Fix Trajectory Planner Bug where break angles near limit would initally exact stop, 

  not be rounded, then later not stop resulting in discontinuous velocity change



- KMotionCNC Stop Button no longer Kills Thread #1 which allows disable watchdog loop

  in Thread #1 to work properly after Stop 





KMotion_dotNet_Interop

----------------------





KMotion_dotNet

--------------







KFLOPWebNC Example

------------------







KMotion_dotNet Console Example

------------------------------







DynoMotion VB.net Example

-------------------------









Mach3 Plugin

------------







TCC67

-----







User C Programs

---------------



- MPGSmooth.c  - remove 2nd call to WaitNextTimeSlice()



- SpindleMach3JogGear.c added Mach3 Spindle message handler and sets virtual bit based on RPM Range



- MPGSmoothHardwareEnc.c added similar to MPGSmooth.c but uses hardware encoder input





On-line Help

------------



- Updated