KNozz Hardware Specification
| Function | Parameter | Specification |
|---|---|---|
| Inputs | Number Type Resistor Divider Formula Filter Cap, Tau VRef ADC |
2 Analog Inputs Themistor 100K ohm type 10K ohm 1% ADC = 10K / (10K + Rin) * 4095 0.1uF, RC = 1 millisecond 3.3V +/- 1% 12-bit |
| Outputs | Number Type Max Current Max Voltage On Resistance |
2 FET Outputs (NPN Type) Full Opto Isolation 20 Amps 48V 2.1 milli ohms |
| Analog | Number Input Supply Range Output Impedance Response Tau |
1 Fully Isolated Output 5-30V <1K ohm 10ms |
| Connectors | JP1 Aux Bus to KFLOP J1 - Bed Heat Element J2 - Nozzle Heat Element J3- Analog J4 - Thermistors/VRef |
16 pin Header (IDC 0.1 inch pinch) 4 pin Pluggable Term 5mm Amphenol-FCI TJ04715000J0G 4 pin Pluggable Term 5mm Amphenol-FCI TJ04715000J0G 4 pin Pluggable Term 5mm Phoenix Contact 1934887 4 pin Pluggable Term 5mm Phoenix Contact 1934887 |
| Logic Supplies | Voltage VDD5 Max Current |
+5V ±10% (supplied by KFLOP) 0.1 Amps |
| Environment | Operating Temperature Storage Temperature Humidity Lead |
0-40° C 0-40° C 20-90% Relative Humidity, non-condensing Lead Free RoHS |
| Dimensions | Length Width Height |
2.0 inches (50.8mm) 4.5 inches (114mm) 0.75 inches (19mm) |